{"id":17311,"date":"2021-06-19T06:46:26","date_gmt":"2021-06-18T22:46:26","guid":{"rendered":"https:\/\/smartairfilters.com\/?p=17311"},"modified":"2024-04-30T16:16:53","modified_gmt":"2024-04-30T08:16:53","slug":"using-air-monitor-to-determine-when-to-replace-hepa-filter","status":"publish","type":"post","link":"https:\/\/smartairfilters.com\/en\/blog\/using-air-monitor-to-determine-when-to-replace-hepa-filter\/","title":{"rendered":"Using an Air Monitor to Determine When to Replace a HEPA Filter"},"content":{"rendered":"

It can be difficult to tell when to replace a HEPA filter. Should we one by looks? Probably not. Going by looks turns out to be a poor measure of filter efficiency. The best way to test a HEPA filter’s efficiency and determine when to replace it is to use an air quality monitor.<\/p>\n\n\n\n

Why Use an Air Quality Monitor?<\/h2>\n\n\n\n

Air purifier companies give recommendations on how often to replace their HEPA filters. The problem is these recommendations are rarely data-backed and seemed to be pulled out of the sky. Furthermore, how long a HEPA will last depends on many factors such as outdoor air quality levels and how often the purifier is used. <\/p>\n\n\n\n

In addition, it is difficult to gauge the effectiveness of a HEPA simply by looks. Below are three HEPA filters from our 200-day test of the original DIY HEPA. On day 90, the HEPA looks quite dirty, but the data shows it had only lost around 4% effectiveness at that point. On day 200, the effectiveness had dropped significantly by 50%. <\/p>\n\n\n

\n
\"HEPA<\/figure><\/div>\n\n\n

Instead of going by looks or relying on recommendations from the manufacturer whom may have incentives for customers to replace the filters more often, using an air quality monitor gives you real-time data on the state of your HEPA filter.<\/p>\n\n\n\n

Read More: The Issue with the HEPA Filter Replacement Recommendations from Air Purifier Companies<\/a><\/p>\n\n\n\n

What Air Quality Monitor Should You Use?<\/h2>\n\n\n\n

The most dangerous particles in our air are typically some of the smallest particles. Particles under 2.5 microns in size, called PM2.5, are tiny dangerous particulates that can enter one’s bloodstream and organs and cause a variety of health problems. <\/p>\n\n\n

\n
\"Using<\/figure><\/div>\n\n\n

Because of this, a PM2.5 air quality monitor is one of the best tools to ensure the air is safe to breathe and to test the efficiency of a HEPA filter in removing these particles. <\/p>\n\n\n\n

Fortunately, an accurate PM2.5 air quality monitor does not need to break the bank. Test data shows the best PM2.5 air quality monitors are also some of the cheapest<\/a>. <\/p>\n\n\n

\n
\"How
Smart Air’s Chief Nerd Scientist Paddy with an under $150 Kaiterra Laser Egg<\/figcaption><\/figure><\/div>\n\n\n

Looking for a PM2.5 air quality monitor? Check out our data-backed article on the best air quality monitors on the market:<\/p>\n\n\n\n

Read More: Best PM2.5 Air Quality Monitors in 2021<\/a><\/p>\n\n\n\n

Two Ways to Use a PM2.5 Air Quality Monitor to Test HEPA Filters<\/h2>\n\n\n\n

Method one is the simplest method, but comes with its flaws. Although a bit more hands on, method two is the preferred method that allows one to precisely see a HEPA’s reduction in effectiveness over time.<\/p>\n\n\n\n

Method 1: Ensure Air Quality Levels Are \u201cSafe\u201d<\/h4>\n\n\n\n

One method is to use an air quality monitor to periodically test the indoor air quality levels. Once the HEPA filter can not consistently bring air quality levels to “safe” levels, it is time to replace the HEPA filter. The WHO recommended annual limit for PM2.5 is 10 micrograms. Ideally, an air purifier with a new HEPA filter should reduce air quality levels to under this limit. If not, a stronger purifier or multiple purifiers are needed to cover the intended area. <\/p>\n\n\n\n

Read More: Four Steps to Choosing a Purifier<\/a><\/p>\n\n\n

\n
\"Using
Monitor showing air quality levels hovering around the upper limit of the WHO recommendations (10 micrograms or 42 AQI)<\/figcaption><\/figure><\/div>\n\n\n

Once a purifier is unable to reduce levels to below this limit as it can with a new HEPA, this may indicate the filter should be replaced. <\/p>\n\n\n\n

Although this is the simplest method to use an air quality monitor to test a HEPA filter, there are a few issues with it. First, recommended limits for PM2.5 are very general. In reality, PM2.5 air pollution is similar to lead, in that there is no “safe” level<\/a>. Levels below 10 micrograms can also be damaging to one’s health. <\/p>\n\n\n

\n
\"Deaths<\/figure><\/div>\n\n\n

Read More: Here\u2019s Why the WHO Air Quality Guidelines Are Unsafe<\/a><\/p>\n\n\n\n

Method 2: Compare With Air Quality Levels Using New Filter<\/h4>\n\n\n\n

The preferred method for testing an air purifier’s HEPA filter is a little more hands-on. This involves testing the indoor air quality while using a new HEPA for a period of time to get a baseline for what exactly the performance of a new air HEPA filter is. As a HEPA filter is used and its effectiveness decreases, one could compare the indoor air quality levels with this baseline.<\/p>\n\n\n\n

For example, below is the data collected for the effectiveness of the original Smart Air DIY filter. As you can see the original “baseline” effectiveness for this filter was reducing particulate levels by ~90%. Of course, collecting this much data is a little overboard, but the idea is to check the filter periodically to see how the effectiveness compares to the baseline.<\/p>\n\n\n\n

<\/p>\n\n\n

\n
\"Using<\/figure><\/div>\n\n\n

One thing to note is outdoor air quality levels can fluctuate quite a bit, which can influence indoor air quality levels. Therefore it is recommended to bring the air quality monitor outside and check outdoor air quality to ensure the comparison is being made at similar outdoor air quality levels. <\/p>\n\n\n\n

At what level decrease in HEPA effectiveness should a HEPA filter be replaced? There is no “tipping point” where the effectiveness of a HEPA nosedives. A good rule of thumb is to change the filter when it becomes obvious the filter can not consistently get air quality levels to what it could when new. <\/p>\n\n\n

\n
\"Blast
Smart Air office, using an IQAir AirVisual Pro monitor with our Blast and Blast Mini air purifiers<\/a><\/figcaption><\/figure><\/div>\n\n\n

Summary: Using an Air Quality Monitor to Test a HEPA Filter<\/h4>\n\n\n\n

Ultimately, it comes down to a trade-off between the cost of replacing a filter and effectiveness. The more often a filter is replaced, the more effective the air purifier can filter the air. But this comes at a cost. With a PM2.5 air quality monitor, one knows exactly how effective their HEPA filter is and can replace their HEPA based on data, not the eye test. <\/p>\n\n\n\n

Caveats<\/h4>\n\n\n\n

A few caveats to using an air quality monitor to test a HEPA filter include:<\/p>\n\n\n\n