Dyson’s Pure Cool air purifier looks impressive. However a review of its clean air rating (CADR) reveals this filter does a poor job of providing clean air – the Dyson TP05 Pure Cool’s CADR comes in at just 164m3/hr. That means the Dyson Pure Cool air purifier out as much clean air as a $20 DIY air purifier. Read on to learn more.
Dyson Pure Cool Air Purifier Review
When Dyson launched their Dyson Pure Cool Air Purifier, I was excited to see what new tech or super-efficient design they would bring to the show. But what I found was a let down. Dyson hadn’t changed air purifiers. They’d just changed their marketing around air purifiers.
Maybe I shouldn’t have been surprised. After all, purifiers are just fans and filters. They’re so simple anyone can DIY their own.
But when Dyson’s purifiers achieved terrible results in the industry standard test, Dyson started criticizing the test. That industry standard test is the “clean air delivery rate” (CADR). Here’s what the test looks like:
It’s true, the CADR test isn’t perfect and it has its downfalls (CADR tests are done in a lab, not real-world rooms). However, Dyson seemed to go quite far in criticizing the CADR test. Due to the poor results of the Dyson’s Pure Cool Air Purifier in the industry standard CADR test, Dyson markets their own tests which make the purifiers seem to perform better. Dyson got a few things wrong about CADR. Let’s clear things up.
Three Facts Dyson Got Wrong About CADR
Dyson makes claims to defend the Pure Cool air purifier and their other product’s low CADR rating. But many of their claims trying to discredit the air purifier industry standard are false.
Dyson Claim #1: CADR doesn’t focus on different particle sizes.
Dyson’s website claims that CADR doesn’t “focus on how well a purifier captures different particles sizes.” That’s flat wrong. There are essentially two standards for CADR tests. The AHAM (US) test and the GB-18801 (China) standard. The US standard tests for particles in three ranges, which they call “dust,” “pollen,” and “smoke.”
|Particle Name||Particle Size Range|
|Smoke (Tobacco)||0.09 – 1.0 microns|
|Dust||0.5 – 3.0 microns|
|Pollen||0.5 – 11 microns|
The Chinese GB-18801 standard also tests and reports filter efficiency for particles ranging 0.30 – 10 microns. That covers from the smallest, hardest-to-capture 0.3 micron particles, all the way to large dust and pollen particles. Here are the CADR test results for Smart Air’s Sqair air purifier.
Dyson Claim #2: CADR doesn’t measure filtration efficiency
This one’s right, but misses the point. There are two main ways to describe an air purifier effectiveness:
- When air passes once through the filter, what percentage of particles does it filter out?
- In a given amount of time, what percentage decrease in particles in the room air did the purifier achieve?
The whole-room effectiveness of Dyson’s Pure Cool air purifier is really what most users care about, and that’s what the CADR test measures. For single-pass filtration, there’s a separate official test and rating system for that, the EN1822 test. Elsewhere on their website Dyson mentions that test, so they’re aware of it.
Nerd Note: The EN1822 is what defines the HEPA standards like H13 we often see. If we want to know about single pass filter efficiency, then we should look at the HEPA filter’s rating (e.g. H13/H14 etc.).
So this claim is like criticizing a basketball game for not measuring dunking performance. If you want to focus on dunks, there are dunk contests that do that. It’s not the main purpose of basketball games.
Dyson Claim #3: CADR only tests for particles
This is wrong. In fact, Dyson even contradicts themselves on this one. On their English website they say CADR tests for particulate. But on Dyson’s Chinese Tmall product page, they provide CADR results for benzene and formaldehyde (gases).
The GB-18801 CADR test covers testing VOC gases such as benzene and formaldehyde too.
It’s possible that Dyson is only referring to the US (AHAM) test here.True, the AHAM test doesn’t specifically state that it can test for gases, although the EPA explains that it can.
If Dyson is reading this, what can they do?
#1 – Be Open About the Pure Cool air purifier’s CADR Rating and Internal Test Results.
It’s really difficult to find information on the CADR on the Dyson website. If Dyson provided this – along with results from their own internal tests – consumers will have more information on hand to make better informed decisions. Data rules!
To find the Pure Cool’s CADR, we had to scour Dyson’s Chinese shop for details. In China, CADR results are required by law. We found the TP05’s particulate CADR of 164m3/hr, and a formaldehyde CADR of 56m3/hr at the very bottom of their TMall page.
#2 – Publish the details of the Dyson internal ‘TM-003711’ test method.
Dyson Engineer David Hill said “We believe all air purifiers should be tested this way [using Dyson’s method]”. If Dyson’s test really is better than CADR, then openly publishing the testing method will benefit all air-breathers around the world.
About Smart Air
The air purifier industry is opaque. It’s profit-driven, not health-driven. Big companies charge hundreds or thousands of dollars for technology that was invented over 70 years ago. We created Smart Air to bring open data and simple, effective air purifiers to opaque industry. We provide no-nonsense, honest purifiers to people (like us) who just want to breathe safe air.